Bascolin 1:1

Bascolin 1:1 is a three component sprayable plastic matter determined for either laying brand new road marking or renewal of an old one (structural marking). Sprayable cold plastic marking is mostly applied in projects demanding high application speed in order to avoid traffic obstructions.

Bascolin application requires a special machine with 1:1 mixing ratio also equipped with two pumps for both component processing. Components A and B react after their application straight on road surface. Depending also on the type of spraying gun used, Hofmann guns mixes these components out of the gun body, other guns use other method for processing the Bascoplast.

Advantages of Bascolin 1:1 are high application speed, quick hardening time, low material consumption, longlife quality of road marking.

Field of use

Highways (surface coating)
Intercity roads
Crossings
Roundabouts
Pedestrian crossing (also as a structural marking renewal)

Package

Component A: 25 kg, 250 kg
Component B: 25 kg, 250 kg
Component C: powder hardener 25 kg

Technical data

Solvent-free cold spray plastic for road marking based on reactive acrylic resin.
Component A is a white coloured, component B transparent.
Powder hardener: organic peroxide.
Duration of processing: 5 minutes for already mixed A and B components.
Density:
- Component A: 1,71 g/cm3
- Component B: 1,63 g/cm3
Use of material: 500 – 600 g/m2

Attention for applicants

Before application: Stir up the material well (comp. A and comp. B separately from each other!) The componente B has to be activated with 3% hardener (comp. C)!! 100 parts B : 3 parts C
The air temperature must not fall below 5°C, the relative air humidity must not exceed 75 %. The surface temperature has to be at least 3°C above the dew point but it must not pass over 45°C.

Producers : Basler-Lacke AG, Bresteneggstrasse 17, CH – 5033 Buchs, Switzerland