Basler materials:
Bascoplast fein BA for profile marking - type SPOTFLEX

As a first in the world introduced German road machine producer Hofmann GmbH. a new system of two component cold plastic marking with profiles named "Spotflex". Swiss road marking material producer Basler Lacke developed a special modified material named "Bascoplast fein BA for Spotflex".

The Spotflex means defined 2-component cold plastic agglomerate markings, applied with a 98:2 mixing ratio using air pulsed method used for projects requiring long lifetime period of road marking, retroreflection class II. (retroreflection during night and heavy rain) and noise effect of road marking.

The Advantages of SPOTFLEX

• As a first in the world introduced German road machine producer Hofmann GmbH. a new system of two component cold plastic marking with profiles named "Spotflex". Swiss road marking material producer Basler Lacke developed a special modified material named "Bascoplast fein BA for Spotflex".
• Spotflex means defined 2-component cold plastic agglomerate markings, applied with a 98:2 mixing ratio using air pulsed method used for projects requiring long lifetime period of road marking, retroreflection class II. (retroreflection during night and heavy rain) and noise effect of road marking.
• Marking speeds up to 6 km/h* can be achieved (bellow pump and pressurised container).
• Due to high application speeds and short flushing times obstruction to traffic can be reduced.
• Application of whole container filling without intermediate flushing of the system thus longer stops can be avoided.
• Exact compliance of mixing ratio, therefore mixing as a matter of trial and error is eliminated. 
• Due to high application speeds and short flushing times obstruction to traffic can be reduced. 
• Such profiled markings can be renewed (re-marked) or can be applied on already existing roadmarkings in case a plain effect is requested during daylight and reduced inspection distance.
• Marking system for agglomerate markings, which efficiently applies defined, profiled markings in order to increase night visibility during rain and wet conditions.
• Due to the optimum drainage the individual 2-component cold plastic dots having a height of 3 – 5 mm remain accessible for headlights and will reflect even during heavy rainfall. 
• This system is also suitable for applying roadmarkings combined with a noise effect (depending on the height of dots) when crossing the roadmarking. 
• At the customer’s request large and small dots as well as different raster (distance between the rows) with open or closed edge can be applied.

Downloads:

 Basler Lacke - Spotflex        Měchové pumpy

Gallery